شروط التندر الخاص بمشتريات الاجهزة المختبرية لدائرة صحة ذي قار

1.     رفق مع العرض كتلوك مواصفات الجهاز لغرض مطابقتها وفي حال عدم وجودها يهمل العرض

2.     رفق شهادة الجودة  وتقييم المختبر الوطني للجهاز وفي حال عدم وجودها يهمل العرض

3.     على الجهة المقدمة للعرض ان تكون محاسبة ضريبا

4.     اخر موعد لاستلام العروض يوم 8/12/2019

5.     التجهيز مباشر بعد الاحالة على المكتب المجهز

6.     الالتزام بفترة التجهيز وفي خلاف  ذلك تعتبر الاحالة لاغيه وذلك لضيق الوقت

7.     للاستفسار الاتصال على الرقم 07723847179

التندر الخاص بتجهيز جهاز Tube Sealer

ت

اسم الجهاز والتفاصيل الفنية

العدد

الوحدة

1

تجهيز ونصب وفحص وتشغيل جهاز  Bench Tube Sealer على ان يكون الجهاز حائزا على احد شهادات الجودة التالية (FDA,CE  ) ومزود بشهادة منشأ وان يكون الجهاز مصنع حديثا من منشأ اصلي وغير مستعمل وغير معاد التصنيع  وغير مقلد بالمواصفات الفنية التالية :

Application:

 

The sealing clamp automatically closes once the tube is inserted and

It can be used to seal most of standard PVC tubing available on the market.          

 

·         For heavy duty job

·         Automatic clamp

·         SEAL-HAND :  Standard sealing handle equipped with two coaxial cables

Specification:        

·         The seal is done in ≤ 1.5 seconds.

·         RF output  ≥  80 Watts

·         Working frequency ≈   40,680 MHz  (or other depend on manufacture)

·         An anti-spark and overheat protection systems to avoid damage to the system and tubing is included.

·         Humidity 10 -90% RH without condensation

·         Power voltage  ≈  115 / 230 V, 50/60Hz

·         Energy consumption   ≈   420VA

 

مع الضمان ما بعد البيع لمدة ثلاث سنوات مواد و عمل  مع التدريب الموقعي لكافة الكادر العامل على الجهاز مع جلب كافة الكتالوكات الخاصة به وان لا يقل تاريخ صنع الجهاز عن اخر ثلاث سنوات من تاريخ الشراء

 

14

عدد

التندر الخاص بتجهيز اجهزة  مختبرية الى دائرة صحة ذي قار

ت

اسم الجهاز والتفاصيل الفنية

العدد

الوحدة

1

تجهيز ونصب وفحص وتشغيل جهاز   CENTRIFUGE   على إن يكون حائزا على احد شهادات الجودة التالية (FDA, CE) و مزود بشهادة المنشأ و أن يكون الجهاز مصنع حديثا من منشأ أصلي وغير مستعمل وغير معاد التصنيع وغير مقلد وان يكون الجهاز مقيما من قبل المركز الوطني للمختبرات التعليمية و بالمواصفات الفنية التالية:

 

Centrifuge  Specifications:

  • Spins 3ml-15ml test tubes at 5000 rpm
  • Minimum 16 tubes
  • Easy cleanout bowl
  • 0 - 5000 RPM
  • Digital programmable control and readout
  • Variable speed and time settings
  • Lid safety lock
  • high g-forces for fast separation
  • Rubber feet to prevent slipping
  • Impact-resistant lid
  • Zero-rpm interlocking lid
  • Wide mouth for easy clean-up
  • Metal rotor and tube shields
  • Brushless motor
  • Angled and (swinging )tube holder as alternative
  • Fast breaking
  • Programmable time and speed
  • Rubber feet to prevent slipping
  • POWER REQUIRMENTS: 220v, 50 Hz.

مع الضمان ما بعد البيع لمدة ثلاث سنوات (مواد وصيانة) مع التدريب ألموقعي لكافة الكادر العامل على الجهاز وأن لا يقل تاريخ تصنيع الجهاز عن اخر ثلاث سنوات

8

عدد

2

تجهيز ونصب وفحص وتشغيل جهاز   SPECTROPHOTOMETER- VISIBLE     على ان يكون الجهاز حائزا على احد شهادات الجودة التالية (FDA , CE)  و مزود بشهادة المنشأ و أن يكون الجهاز مصنع حديثا من منشأ أصلي وغير مستعمل وغير معاد التصنيع وغير مقلد وان يكون الجهاز مقيما من قبل المركز الوطني للمختبرات التعليمية و بالمواصفات الفنية التالية:

 

Spectrophotometer-Visible Specifications:

 

Purpose: used in the quantitative determination of solutions

-Heavy duty and compatible design

-Microprocessor based, grating type double or single beam Spectrophotometer with built in data logging in.

-The unit should have self-diagnostics compartment with built-in 16 mm test-tube holder and can accept round and square tubes.

-Wavelength Range: 400 - 800 nm

-Spectral Bandwidth: 4nm

-Wavelength Accuracy: ±2nm

-Lamp type: Quartz halogen or tungsten lamp.

-Wavelength resolution: 0.1 nm

-Photometric Range :Absorbance ( -2.5 to 2.5 )Abs       &%transmittance 1 to 200%T

-Photometric linearity: <1% for A< 2.000 in the range 340 to 900nm.

-Photometric Accuracy (in the range 200 to 1000nm): 0.003 A for A <0.600,0.5% of the reading for 0.600 <A< 2.000

-Automatic cell reorganization facility

 

-Methods and profiles: ≥100 user defined methods,     20 Profiles each for kinetics and spectra

-Detector: Silicon photodiode

-Output: LCD display with capability to interface with any PC.

-Power line : 220-240VAC,50-60Hz

-The unit shall be capable of being stored continuously in ambient temperature of 0-60deg C and relative humidity of 15-90%

-The unit shall be capable of operating in ambient temperature of 10-40 deg C and relative humidity of 80%

-Interfaces: dual USB connection, 1 RS232 for Data transfer to PC and Printer and data transfer from PC.

-self test and auto calibration modes .       

 

مع الضمان ما بعد البيع لمدة ثلاث سنوات ( مواد وصيانة) مع التدريب ألموقعي لكافة الكادر العامل على الجهاز وأن لا يقل تاريخ تصنيع الجهاز عن اخر ثلاث سنواتمن تاريخ الشراء.

4

عدد

3

تجهيز ونصب وفحص وتشغيل جهاز  MICROSCOPE    على إن يكون حائزا على احد شهادات الجودة التالية (FDA , CE) و مزود بشهادة المنشأ  و أن يكون الجهاز مصنع حديثا من منشأ أصلي وغير مستعمل وغير معاد التصنيع وغير مقلد وان يكون الجهاز مقيما من قبل المركز الوطني للمختبرات التعليمية و بالمواصفات الفنية التالية:

 

Microscope Specifications:

-Purpose : to provide magnification and resolution of

specimens under examination

-Heavy duty and compatible design

-Observation tubes Type  : binocular

-Eyepieces: 4x, 10x, 40x,100x ,wide field, high-eye point

-Inter pupillary distance adjustment ; mm  : 50-75

-Nosepiece configuration: 4-7 positions

-Objectives Magnification: Achromatic, plan achromatic, phase contrast

-Total magnification: 20x-1,500x

-Stand Focusing mechanism: Moving stage, rack and pinion

coarse, fine adjustments: Coaxial, low mounted, 1 m increments

-Stage Type: Mechanical,

-Tension adjustment  :  Coaxial

-Stage Motion: X-Y

-Condenser type: focusable

-Numerical aperture: 0.9 to 1.4

-Light source: 6 V, 30 W halogen lamp (light blue without

heat) with replace- able socket, external power supply .

-Contrast methods: Bright field, phase, dark field, polarization, fluorescence

-Ambient storing temperature :0-60C

-Ambient working temperature :0-50C

-Power Supply :220-240V,50-60Hz

 

مع الضمان ما بعد البيع لمدة ثلاث سنوات (مواد وصيانة) مع التدريب ألموقعي لكافة الكادر العامل على الجهاز وأن لا يقل تاريخ تصنيع الجهاز عن اخر ثلاث سنوات من تاريخ الشراء.

 

7

عدد

4

تجهيز ونصب وفحص وتشغيل جهاز  Micro centrifuge  على إن يكون الجهاز حائزا على احد شهادات الجودة التالية (FDA , CE) و مزود بشهادة المنشأ  و أن يكون الجهاز مصنع حديثا من منشأ أصلي وغير مستعمل وغير معاد التصنيع وغير مقلد وان يكون الجهاز مقيما من قبل المركز الوطني للمختبرات التعليمية و بالمواصفات الفنية التالية:

 

Micro Centrifuge Specifications :

 

-Purpose:  to separate suspended particles from a liquid or to separate liquids of different densities

-Heavy duty and compatible design

-Rotational Speed :> 8000 rpm with fixed setting

-Number of tubes (type)  :Range   (16 -24) (75 mm capillary)

-Rotors :Horizontal

-Timer : Range, min : 0 to ≥60 with increment ≤ 1min

-Braking Time, sec : 120

-Brushless  :Yes

-Noise Level, dB : <70

-Lid interlock: Yes

-ALERT INDICATORS: Audible imbalance, leakage current, lid open, end of run

-Other specifications :Automatic breaking , air vent on the cover, LED display and a keyboard, tachometer to indicate the speed in rpm should be available , inner safety lids that fit over the rotor or tube covers that contain the sample material should be  available, Gaskets with high quality

 material for tight seal, Bowl drains, the centrifuge should allow calibration by photo tachometer manner with lid closed, should use at least an 8 cm rotor radius, a 50 μL sample, and a 75 mm capillary tube, inner protective cover over the rotor assembly.

-Ambient storing temperature :0-60C

-Ambient working temperature :0-50C

-Line Power, VAC :220-240VAC , 50-60Hz

 

مع الضمان ما بعد البيع لمدة ثلاث سنوات (مواد وصيانة) مع التدريب ألموقعي لكافة الكادر العامل على الجهاز وأن لا يقل تاريخ تصنيع الجهاز عن اخر ثلاث سنوات من تاريخ الشراء.

 

7

عدد

التندر الخاص بتجهيز جهاز Automated Processing Tissue  لمستشفى الحسين التعليمي

ت

اسم الجهاز والتفاصيل الفنية

العدد

الوحدة

1

تجهيز ونصب وفحص وتشغيل جهاز   Automated Processing Tissue  على إن يكون حائزا على احد شهادات الجودة التالية (FDA, CE) و مزود بشهادة المنشأ و أن يكون الجهاز مصنع حديثا من منشأ أصلي وغير مستعمل وغير معاد التصنيع وغير مقلد وان يكون الجهاز مقيما من قبل المركز الوطني للمختبرات التعليمية و بالمواصفات الفنية التالية:

 

 Description of Function

-Tissues from the body taken for diagnosis of disease processes are processed by the tissue processor in the histology laboratory to produce microscopic slides that are viewed under the microscope by pathologists.  Technical Specifications:

-Capacity (a)200-250 cassettes in organized basket(b) 275-300 random basket

Reagent stations – Number of vessels: 10 (1.8- 2 liters ea.)-

Paraffin stations– Number: 2 ( 1.8- 2 liters  ea)-
 -Temperature setting range: 35 - 70°C
– Over temperature release: 75°C >(± 5°C)
-Can be configured for three.

Following programs should be available:
– Number of programs:9-12 (selectable)
– Programmable time per station: From 1 sec. to 100 hours
– Spiral agitation, Vertical agitation, Centrifuging ,Centrifuging time should be selectable.
– Program can be delayed start or finished up to 5-7 days or more  in advance.

                        Fume extraction system, with active charcoal filter.-

-Quote pricing to up gradation to another basket with similar cassettes capacity.

-Should be an open system capable of using stander  cassettes from open markets.

-Activated charcoal/carbon filter.

-Screen display of time, date ,cycles, step by step record of processing.

-Can be configured for 3 wax bath and 9 reagent station or 2 wax bath and 10 reagent stations each with a capacity of 1.8-2 liters.

-Automatic in process reagent and wax rotation facility.

-Movement of reagents with vacuum and positive pressure.

-Pre heating facility.

-Vacuum selection at any step.

-Remote alarm to signal possible problems and reagent change etc.

-Reagent change based on specific gravity of the first alcohol.

-Clear door/lid for viewing specimens during processing.

Accessories

-SS basket Rotor – 01

-SS tissue basket- 01

-Aluminum reagent vessels of 1.8-2 litre capacity each-10

-Beaker covers- 11

-SS wax baths, tissue capsules with perforations- 02

-Cassettes-10,000

-Plexiglas fume containment shield with Fume outlet Tubes, Activated carbon filter Receptacle and Vacuum function.

-Stainless steel counterweight to keep the samples submerged.-01

Environmental factors

-he unit shall be capable of being stored continuously in ambient temperature of 0 -50deg C and relative humidity of 15-90%

-The unit shall be capable of operating continuously in ambient temperature of 10 -40deg C and relative humidity of 15-90%

Power Supply

-Power input to be 220-240VAC, 50Hz

-Suitable voltage corrector/stabilizer

-Resettable overcurrent breaker shall be fitted for protection

-Suitable UPS with maintenance free batteries for minimum one-hour back-up should be supplied with the system.

 

الضمان ما بعد البيع لمدة ثلاث سنوات (مواد وصيانة) مع التدريب ألموقعي لكافة الكادر العامل على الجهاز وأن لا يقل تاريخ تصنيع الجهاز عن اخر ثلاث سنوات

1

عدد